February 13, 2016

From LPOD
Jump to: navigation, search

Before and After

Originally published April 19, 2005

LPOD-2005-04-19.jpeg

Image Credit: Chris Graham


Before and After

Hundreds, perhaps thousands, of amateur astronomers use digital cameras to image the Moon. Chris Graham has done this with a standard 5” telescope and a Canon Powershot camera and achieved relative success (left) – an image that is reasonably sharp and shows all the main craters. But clicking the camera at the eyepiece is only the first step in extracting all the information from an image and converting it into an attractive presentation. In this case, the image is flat – it has a limited tonal range with no pure whites or deep blacks. Using Photoshop Elements (a relatively cheap program with excellent capabilities for image processing) I have enhanced Chris’ image to create a more dramatic version (right) that has a more complete tonal range. I used the “Filter” “Unsharp Mask” command to increase tonal range across the image, but this lightened the limb. Next I used “Enhance” “Brightness and Contrast” to boost the contrast - getting bright whites and blacks. Finally, I daubed the bright limb with the “Burn Tool” to darken the limb. To make the image more attractive the “Eraser Tool” made most of the sky black, and then the “Burn Tool” feathered the edges of the black around the bright Moon. It takes more time to explain than to do, but nearly all images can be improved 10-50% by simple manipulations. I always start with “Unsharp Mask” which performs magic! Try it on your images. Oh, one more correction is necessary - did you notice that this image has east and west flipped? Your telescope/camera optics may do that, but for comparison with maps and other images it's best to arrange with E to the right and N up.

Chuck Wood

Technical Details:
13 April 2005. Skywatcher Startravel 120mm, f/5; 3 images processed and aligned in imerge.

Yesterday's LPOD: The Lunar Crater Wood

Tomorrow's LPOD: Almost Classic Crater



Author & Editor:
Charles A. Wood


COMMENTS?

Register, Log in, and join in the comments.